To drill deep cores, from 2 to 40 linear metres, you need to go beyond traditional techniques, in which the core is extracted relatively easily.
In these cases, continuous core drilling is used: the hole is made by progressively screwing on dedicated extensions, produced in lengths from 25 to 100 cm and diameters from 30 to 300 mm, until the required depth is reached.
In this way, unlike the traditional core drilling method, there is no need to extract the core from the hole every 50 cm of drilling, and the hole can be made in a single pass, without breaking the core inside it.
The resulting core is removed once drilling is complete using a core lifter, which makes cleaning the hole easier and reduces overall execution times.
The images show a sample taken from a white marble face in the Carrara quarries.
The user drilled a blind hole 4,5 metres deep with a diameter of 82 mm: given the demanding working conditions, the choice was to work with a SEA Technology 3200 Watt single-phase core drill, model SEM32, mounted on a professional drill stand built entirely in steel, model PSTAND250, which can support drilling in diameters from 20 to 300 mm.
The core drilling system, together with the power of the motor and the great rigidity of the steel stand, allowed our customer to drill the various holes in excellent times, with great final satisfaction with the work carried out.
With SEA Technology’s continuous core drilling solutions, you can drill blind holes or through-holes in many types of material, such as brick, concrete, stone, rock, reinforced concrete, marble and granite.



