For a construction or building services company, the likelihood of working in settings with limitations and constraints of various kinds is very high, especially in Italy. With the renovation boom of recent years, for example, there has been an increase in work in occupied buildings, both residential and industrial, where wet core drilling is not an option. Here are some of the most common cases.
Old buildings
In older buildings, with walls up to 1 metre thick, the traditional wet technique carries the risk of water seepage, which can cause long-term damage. The same applies to all buildings subject to historical and architectural protection, where limited, minimally invasive work is advisable.
Transport difficulties
As long as you are working on one level or on just a few floors, transporting core drilling equipment poses no particular difficulties. It is a different story in taller buildings, where carrying a wet core drill, tools and stand on your shoulders, weighing no less than 25 kg in total, causes hardship for operators.
When 3 kW is not enough
A standard wet core drill requires at least 4.5 kW at start-up and draws an average of 3.2 kW during operation. In residential buildings, with few exceptions, the power supplied by the meter is 3 kW: not enough to work with, unless a dedicated generator is used.
Anchoring
For wet core drilling, the drill stand must be fixed to the wall. So, in addition to the nuisance of the water and dust generated during the work itself, holes have to be drilled to anchor the core drill’s support stand.
The ultimate solution
In cases like these, using a dry core drill with a dust extraction kit solves every problem at its root.
With the SEADRILL 1800 and dedicated diamond core bits such as the Corona Tre 150 and Corona Tre 300, it is in fact possible to dry core drill reinforced concrete and other materials up to 1 metre deep, with diameters from 32 to 205 mm.
The core drill weighs approx. 5 kg and considerably reduces the total weight the operator has to handle when carrying out the work or moving from one point of the site to another: on average 10-15 kg, compared with the 25-30 kg required by a wet system.
With its 1800 W of power, it can be used in any residential setting. It also allows all core drilling operations to be carried out freehand, without the need for stands or additional anchoring.
SEADRILL 1800 is therefore the ultimate solution for construction and building services professionals and for all tradespeople who need to do a first-class job in any setting, even the most difficult. For higher-quality, cleaner work, we recommend combining the SEADRILL 1800 with the dedicated dust extraction kit.
Watch the video!
This video is hosted by YouTube, which may store data in your browser when it is played.