On sites for laying FTTH network pipes and cables, work on the road surface needs to be fast and minimally invasive. Especially in urban areas, keeping down the time and impact of the work is essential. To meet these needs, SEA Technology has developed the professional SEAFLOOR 501 floor saw, which combines top performance with outstanding ease of use.
Fitted with the new 450 and 500 mm diameter grooving blades, available in 15 mm and 20 mm cutting widths (exclusive to SEA Technology), SEAFLOOR 501 makes ultra-narrow, ultra-shallow cuts.
For example, the 20 mm wide blade produces micro-trenches exactly 20 mm wide and up to 175 mm deep, in a single pass: these results are unique compared with those achievable with other machines of similar specifications.
Compared with a trencher, which produces mini-trenches of 6-10 centimetres that must then be filled with expensive materials, SEAFLOOR 501 reduces trench size to 15 or 20 millimetres, so that just 1/5 of the material is enough to fill them.
SEAFLOOR 501 is easy to use in very tight spaces and can be carried in any van, with no need for a truck with a flatbed and crane. This means it can work almost anywhere, optimising site times and costs.
A closer look
The machine is powered by a 13 HP Honda GX 390 engine, with direct drive between engine and pulley. The water distribution system through the flange atomises the water, reducing consumption by 30% and ensuring optimal cooling of the blade.
The inspection window makes the operator’s job easier, allowing belt tension to be checked without removing the guard and frame. In addition, the external screw allows the belt to be re-tensioned when necessary, again working from the outside without having to remove anything.
Finally, the depth gauge on the SEAFLOOR 501 can be adjusted to the diameter of the blade in use, so as to set its zero point and measure the cutting depth correctly, whatever the tool used.
BROWSE THE GALLERY AND FIND OUT MORE ABOUT SEAFLOOR 501





