Sea Technology has expanded its range of wet core drilling solutions which, with no fewer than 11 models, covers core drilling diameters from 12 to 1100 mm to handle, for example, openings for ducts and water pipes, the installation of concrete manholes and tanks, ventilation holes, bracing to make industrial buildings safe, and much more.
A one-of-a-kind core drill
Among the various machines available, the SEADRILL 1600A was created to solve a very common problem encountered on sites for the seismic upgrading of industrial buildings: the impossibility of drilling holes from 18 to 24 mm in diameter – needed to fix the connecting brackets between the beams and the roof of the building – with ordinary core drills.
Standard core drilling machines, from 57 to 127 mm, reach from 600 to 1.500 rpm, which is insufficient for this specific application. With its 9.000 rpm, the SEADRILL 1600A solves the problem at its root and stands out as a solution for anchor drilling as well as core drilling, as it supports drilling diameters up to 60 mm.
Single-phase or three-phase, top performance
The SSR 38 is a motor for diamond core drills suitable for stand-mounted use and for drilling holes in materials such as rock, concrete, asphalt and masonry.
The 3700 W rated power of the single-phase motor allows core drilling up to 400 mm in diameter, raising the bar compared with the 300 mm achievable with 3200 W core drills.
It also has 6 electronic and 3 manual speeds, bringing the number of possible speeds to 18 – compared with 3 on ordinary mechanical core drills.
A dedicated control panel allows them to be set, even while the tool is in use, to reach the speed best suited to the hole diameter. Similar in concept and features is the SSR 75 motor, which differs from the previous model in its three-phase motor and 7500 W rated power, very high for an electronic core drill.
Which stand to choose?
The type of stand can be chosen according to how often it will be used. For occasional work, aluminium stands are appreciated for their low weight and ease of handling, especially in blocks of flats and tall buildings.
For companies that carry out core drilling frequently, it is better to choose steel stands, which require no maintenance and allow large machines to be used for holes over one metre in diameter.
Complete systems
Sea Technology offers a wide choice of stands, 4 in aluminium and 4 in steel, for core drilling diameters from 205 to 1000 mm, with different travel systems and other features that allow a targeted choice. Complete stand and motor systems are also available.
One of the most popular is the SEACORE 350, consisting of the PSTAND250 steel stand and the Sem 32 motor. By fitting the dedicated spacer supplied, it can drill cores up to 350 mm in diameter in complete safety.
Ask the Sea Technology team for help in identifying the professional wet core drilling system best suited to your needs.




